How to Replace Your GENERAL ELECTRIC Oven`s Thermal for More Also Cooking

Without a functioning thermostat, your cooker won`t be able to heating evenly. Depending about the damage, the appliance`s enthusiast might not turn on or off. If you would like to affect the element yourself, order a new replacement part #WBK20K10004 for GE design ovens and stick to this procedure:

Disconnect the oven.
repair oven thermostat to start together with you unplugging the appliance. Because this repair involves straight manipulating electrical pieces, you need in order to make sure typically the power is totally disconnected before getting started.

Take away the temperature control system knob and the back upper access section.
Locate the temperature setting knob on the top access panel. Pull the knob covering free from the particular shaft. Then take the oven away from the wall. Unscrew the main rear access section and set it aside.


Uninstall typically the thermostat assembly.
Find the boxy outside of the thermostat set up. It usually has an X condition on the rear. Next, uninstall typically the mounting screws around the front access -panel that were obscured underneath the thermostat button. Then remove typically the wires attached to the part. Because there are various wiring, take a picture of the orientations prior to deciding to remove any. This can give an individual an easy manual when you install the modern part.
The particular thermostat includes a new temperature sensing lamp that runs straight down the back regarding the applying and directly into the oven on its own. Release it coming from the retaining fasteners at the rear of the cooker interior and thread it up in order to the back from the appliance. Set the full thermostat aside.

Install the new element.
Unlike most set up procedures, don` t reassemble the oven in backward order. First, secure typically the box in the thermostat assembly directly to the backside involving the oven by simply tightening the front facing screws under the particular knob. Once the part is firmly in place, attach the wires. Use your picture as a facts ensure everything is definitely connected correctly.
Subsequent, thread the realizing bulb down via the back of typically the oven and in to the interior. Show it to the particular rear wall under the element.

Reassemble the oven.
Slip the rear screen into position and make sure the bottom videos are in place. Next affect the screws together the panel` h edge. Move to the front of the particular appliance and drive the knob back again into position.